LAMINATED FELT ▶ NEW TYPE OF FELT WHICH ACHIEVED BY A NEW NEEDLING TECHNIQUE & SPECIAL FINISHING ▶ TO COMBINE TWO MORE LAYERS, SO PAPER SIDE(SURFACE LAYER) IS USUALY SINGLE LAYER FOR GOOD SURFACE QUALITY AND NON PAPER SIDE(BOTTOM LAYER) IS USUALY DOUBLE LAYER FOR COMPRESSIBLITY. ▶ KEEPING HAVE OVERALL PRESS FELT’S CHARACTERISTICS ▶CAPABLE TO KEEP CONSTANT VOID VOLUME AGAINST LOWER WATER PRESSURE ▶BETTER AVAILABILITY OF HIGH NIP PRESSURE ▶ GOOD CALIPER RETENTION ▶BETTER SURFACE PROPERTIES FOR PRINTING PAPER AND HIGH QUALITY BOARD GRADES ▶CONSTANT AND HIGH DEGREE OF DEWATERING CAPACITY ▶EVEN MOISTURE PROFILE SHORTEN BREAK IN TIME & LITTLE VIBRATION BATT ON MESH FELT ▶ STANDARD TYPE (SINGLE LAYER) ▶ COMPONENT OF MULTI NYLON FILAMENTS TWISTED FOR WARP THEREFORE BETTER SELF-CLEANING AND HIGH WATER PERMEABILITY ▶ PRESS FELT OR WET FELT ACCORDING TO CHOOSING THE YARNS AND BASE WEAVE STRUCTURE ▶GOOD ABILITY OF MEETING THE SPECIFIC REQUIREMENT OF EACH PRESS IN A PAPER AND MACHINE CONDITION ▶ CAPABILITY OF KEEPING VOID VOLUME HAS AN MAXIMUM EFFECT ON DEHYDRATION AT NIP POINT MULTI LAYER FELT                 ▶WOOF IS COMPONENT OF MONO FILAMENT OR MULTI FILAMENTS AND WARP’S COMPONENT DEPAND ON THE CONDITIONS OF PAPER MACHINES ▶ STRONG AND STABLE STRUCTURE ▶ CAPABILITY OF KEEPING VOID VOLUME HAS AN MAXIMUM EFFECT ON DEHYDRATION AT NIP POINT ▶ BETTER WEAR-RESISTANCE AGAINST HIGH PRESSURE ▶ FREEDOM FROM SHADOW MARK ▶ BETTER AVAILABILITY OF UNDER SUCTION PRESS COMBESH FELT ▶ CONVENTIONAL FELT ▶ COMPONENTS OF WOOF AND WARP IS SPUN YARN ▶ TREATMENT WITH HEATING ROLL MACHINE TO GET JUST ACCEPTABLE SIZE AND FIBER DENSITY ACCORDING TO CUSTOMER’S REQUIRMENTS ▶ WOOL RATE DEGREE BY PAPER MACHINE CONDITION IS USUALLY HIGHER THAN NON WOOL RATE ▶ TO BE USED FOR PLANIN PRESS AND SOFT NIP ▶ SPECIALLY GOOD FOR REMOVING PAPER’S MARK PROBLEM BATT ON BASE FELT ▶ COMPONENTS OF WOOF AND WARP IS SPUN YARN OR SPUN/MULTI FILAMENTS ▶ TO COVER WEB ON BASE IN PUNCHING PROCESS FOR CUSHION AT NIP POINT ▶ USUALLY TO BE USED FOR PRESS AND YANKEE TOP ▶ SUITABLE FOR THE PAPER MACHINE WHERE WATER REMOVAL REQUIRES A COMPRESSIBLE FELT WITH LOW DEGREE VOID VOLUME